I parafanghi proteggono te ed i tuoi vestiti dalla sporcizia e dall'acqua presente sul terreno. Oltre ai parafanghi fissati in modo permanente al telaio, in catalogo presenti parafanghi plug-in i quali si possono montare e smontare velocemente a seconda della necessità.
The SKS Bluemels models provide an all-round protection on your trekking bike. The high-quality aluminium-plastic mudguards are corrosion-protected and UV-resistant. They are easy to mount, lightweight, robust and bend-proof. · rear mudguard with cable channel · attachment via secure ASR fitting (front wheel) and standard V-stays (rear wheel) · protector SPB 3.0 strut fixing · front/rear spoiler · rear reflector · incl. fixing material · available in 45 mm width (for tyre width 700 x 28-38 C) € 24,50 or 53 mm (for tyre width 700 x 38-47 C) € 25,50 Please specify width!
High-quality 2-component front dirt board that attaches to the fork of mountain bikes and trekking bikes. The clamping cone becomes almost invisible in the steerer tube. · incl. adapter, suitable for steerer inner Ø 15 - 35 mm · suitable for tyre widths up to 2,4" · Available for wheel size 26“/27,5“ (weight approx. 101 g) or wheel size 28”/29” (weight approx. 112 g) Please specify wheel size!
High-quality 2-component dirt board for the rear wheel of mountain bikes and trekking bikes. Whether you own a 26", 27,5", 28" or 29" bike, you will find the right X-BLADE in our range. Thanks to the quick-release attachment, the dirt board can be mounted on almost every seat post Its 2-joint technology allows an optimal adjustment to the wheel. Suitable for tyre widths up to 2,4" and tube Ø 25 - 40 mm. · Available for wheel size 26”/27,5” (weight approx. 228 g) or wheel size 28”/29” (weight approx. 239 g) Please specify wheel size!
The Mountain Range protects your and your MTB or touring bike effectively against swirled up dirt and mud. The secure ASR fitting at the front ensures a fast decoupling of the struts, when branches or other objects are blocking. This prevents impacts. · attachment via secure ASR fitting (front wheel) and standard V-stays (rear wheel) · mounting with fixed bridges · incl. fixing material · width: 60 mm · recommended tyre width: 26 x 1,6-2,1"
With the Reflective series, you get a mudguard with maximum safety. The applied reflective foil provides additional safety in the road traffic (Note: the reflective stripes offer additional safety and do not replace spoke reflectors or reflective tyres). Thanks to the sandwich construction where superfine aluminium stripes are embedded in a plastic matrix, the mudguards are robust and bend-proof. · attachment via secure ASR fitting (front wheel) and standard V-stays (rear wheel) · mounting with fixed bridges · long front spoiler · reflector · incl. fixing material · width: 45 mm · recommended tyre width: 700 x 28-38 C
For features see item no. 1819098. Attachment struts optionally available under item no. 1906385/1906394/1906400. · Available in the following versions: SKS VELO 65 MOUNTAIN 26“/65 mm broad/max. tyre width 2.35“ SKS VELO 55 CROSS 28“/29“/55 mm broad/max. tyre width 52 mm SKS VELO 47 TREKKING 28“/29“/47 mm broad/max. tyre width 42 mm Please specify version!
This aluminium-plastic model provides an all-round protection on your bike. The material comes with a surface gloss and is UV- and weather-resistant at the same time. · attachment via secure ASR fitting (front wheel) and standard V-stays (rear wheel) · mounting with fixed bridges · incl. fixing material · width: 35 mm · recommended tyre width: 700 x 20-28 C
With this fender, the name says it all. The extra long RACEBLADE LONG protects you, whether you're riding your racing bike in a warm summer rain or on solitary winter trips. The end of each fender extends to below the hub axle. This length ensures that you, and also the cyclist behind you, are spared from splashing. The RACEBLADE LONG can be easily mounted on almost any racing bike and can be perfectly adapted to the radius of the wheel by adjusting the length of the stays. When not required, the RACEBLADE LONG can easily be removed, thanks to the clip connections. Only the metal mounting brackets remain. · wheel size 28"/700 x 18 - 23 C · profile width 35 mm · weight approx. 461 g · length of front fender approx. 520 + 150 mm · length of rear fender approx. 810 + 150 mm
MTB rear mudguard, suitable for XC1 (item no. 1809356) and M1 (item no. 1992717). Quick release fastener for easy attachment to the seat post (Ø 25,4 - 34,9 mm). Material: die-cast nylon Weight: approx. 202 g (XC11) approx. 215 g (XC11 27,5") approx. 220 g (XC11 29") Width: approx. 110 mm Suitable for tyre widths up to 2.6 Available in 26", 27,5" or 29". Please specify size!
RACEBLADE version specially for racing bikes and fitness bikes. Extremely light and aerodynamic. Optimal splash protection. Tool-free assembly within seconds. · incl. adapter for aero forks · wheel size 28"/700 C tyres up to 23 mm width · profile width 35 mm · weight approx. 297 g · length of front fender approx. 460 mm · length of rear fender approx. 570 mm
MTB front mudguard, suitable for XC11 (item no. 1809365). Quick release fastener to attach the mudguard to the fork (max. fork shaft inner diameter 60 mm). Can be dismantled into two parts for easy transport. Particularly rigid and still lightweight construction. Additional flexible zones protect from dirt and increase durability. The polished underside helps prevent dirt buildup. Material: die-cast nylon Weight: approx. 190 g (26") approx. 208 g (27,5"/29") Width: approx. 85 mm Suitable for tyre widths up to 2.6 Available in 26" or 27,5"/29". Please specify size!
Its name (M.O.M. = MTB Oversize Mudguard) reveals that this rear wheel mudguard is designed to keep mud off bigger tyres. Its shape offers optimal protection from dirt and its robust design reduces vibrations to a minimum. A power strap fastening can be adjusted without tools to the respective seat post diameter, its tilt can be adjusted in two steps. · width: approx. 110 mm · suitable for tube Ø 25 - 40 mm · suitable for tyres up to max. 26" x 3.0
D.A.D. stands for "Dual Adjust Dirtboard", which means that this mudguard can be adjusted horizontally and vertically to the fork geometry. With its angular design and its broad profile, it is perfect for large tyre sizes, while at the same time being very robust. This dirtboard can be mounted and removed easily with a special locking system. Also suitable for Manitou forks, thanks to variable alignment. · width: approx. 105 mm · incl. adapter, fits shaft internal Ø 15 - 35 mm · suitable for tyres up to max. 26" x 3.0