Garmin Vector 2S pedal-based power meter
articolo n.: 2141499
articolo n.: 2141499
descrizione del prodotto
For cycling, the power is the direct and objective measure of your cycling performance, as it is – unlike the heart rate – independent of external factors like nutrition, stress, fatigue, heat or cold.
Using a power meter like Vector 2S allows you to precisely measure the intensity of your training and perform power-based training.
The concept behind the Vector 2S system is simple, yet effective: it measures your power output at the pedal, where force is applied. Vector measures the slight deflection of the pedal spindle through your entire pedal stroke and by comparing that measured deflection to a factory-calibration, Vector can determine how much force you’re applying to the pedal. It measures a few hundred times per second. At the Vector 2S, the measuring electronics are only in the left pedal. If you also want to also measure the power from each leg independently of each other, the balance between your right and left leg (balance) or the total power, you can retrofit the right Vector pedal (item no. 2141505). Moreover, the Vector 2S measures your pedalling cadence using built-in accelerometers as well as numerous other data. Those can be displayed on compatible Garmin devices or other compatible, ANT+ compatible bike computers as well as on GarminConnect, the free online fitness community. As the Vector 2S power meter is pedal-based, you don’t have to convert other components such as the crank or the wheel. In this way, the installation is made in only a few minutes and it is also very easy to switch between the training or competition bike and a rental bike in the training camp. Another advantage: While crank-based power meters cause an additional weight of approx. 200-300 g, the Garmin Vector S system only increases the bike’s weight by about approx. 50 to 112 g, when compared to the most common pedal systems like Look, Shimano or Speedplay.
• easy plug & play pedal system – screw the pedal in before mounting the sensor
• a status LED in the pedal transmitter shows important installation and maintenance information
• accurate watt measurement (+/- 2%)
• ANT+™ technology
• robust and durable thanks to accelerometers that are built into the pedal body
• measures more than 10 different watt values and cadence which means that there is no additional cadence sensor required
• automatic recognition of the selected sensor angle – no manual alignment of the pedal sensor
• automatic temperature compensation for accurate watt values in all environments
• dynamic calibration process, also after battery change
• adjustable value for crankarm length: 110 mm to 236,5 mm
• easy firmware updates for future improvements via ANT+ stick
• performance data and graphics at Garmin Connect™: online training portal with more than 3 million users and more than 300.000 uploaded activities every day – analyse your training just after the ride and use free training plans, features for map display via googlemaps, bing or Open Street Map or plan routes and share data.
If you already use a compatible Garmin bike or multisport computer such as the Garmin Edge 500, 510, 705, 800, 810, 1000 or the Forerunner 310XT, 910XT, 920XT, you can make your training even more effective with the Vector power meter:
Edge 705, Forerunner 310XT:
all basic performance or watt values: current power / Ø power / Ø power for 3 sec, 10 sec and 30 sec / Ø power lap / power (FTP) / power (Kj) / power max. / power range
Edge 500, Forerunner 910XT, 920XT, Fenix2:
additional watt values: Power – % FTP / power – IF / power – last lap / power – lap max. / power – NP ( lap) / power – NP (last lap) / power – TSS / power – watts per kg
Edge 510, 800, 810, Edge 1000:
additional overview page with the most important performance/power-based values for the last intervals or laps
In total, the Vector provides around 20 different power and cadence values, including the generally accepted power measuring parameters:
FTP - Functional Threshold Power™:
The FTP is considered to be the highest power level you can maintain for one hour without growing fatigue (=> threshold performance)
NP - Normalized Power™:
The NP is a power averaging method, measured in watts, used to compensate for changes in ride conditions for a more accurate depiction of power expenditure.
IF - Intensity Factor™:
IF is an indication of how hard or difficult a ride was in relation to your overall fitness. (IF = NP/FTP)
TSS - Training Stress Score™:
TSS measures how much stress is put on your body from a ride, while taking into account the duration of the ride.
Pedal body and bearings
• lightweight composite body
• stainless steel plate
• CNC machined, hardened stainless steel spindle
• cartridge bearings
• adjustable tension
• red cleats with anti-slip rubber coating (compatible with Look Kéo, ± 3° angular float, for cleats without float see item no. 2099017)
• weight: left pedal approx. 179 g, right pedal approx. 164 g
The standard pedal transmitters are only mounted after the pedals. This significantly reduces the installation work. The pedals fit crank arms that are 12-15 mm thick and up to 44 mm wide. The large pedal transmitters fit crank arms with a thickness of 15-18 mm and a width of 44 mm. So there are two versions available for the Vector 2S system. Please bear that in mind when ordering.
• ANT+ wireless protocol
• replaceable battery (1 x CR2032 per pedal)
• waterproof according to IPX7
• battery life: minimum 175 hours of active cycling operation
• weight: approx. 23 g
Including: Garmin Vector 2S pedals (1 pair, the left one with sensor), 1 x pedal transmitter, red cleats (1 pair), USB ANT+ stick
Manufacturer’s ref.: 0100145502 (12-15 mm version), 0100145503 (15-18 mm version)
Prodotti Garmin: Pedali Prodotti Garmin: Pedali Sistema di pedali tutti i prodotti del marchio Garmin
Chi ha acquistato questo articolo ha mostrato interesse per
Domande e risposte