I carter per catena proteggono i tuoi pantaloni da sporco, grasso catena e dai possibili danni causati dalla catena/corona.
Matching front part for Hebie Chainglider rear part 350 R (item no. 1511558). This is a chain case floating on the chain, suitable for single cranksets with 38, 42 or 44 teeth. Please specify the matching front part from the chart!
Matching rear part for Hebie Chainglider front part 350 F (item no. 1511381). · 350 R D18 is e.g. suitable for Shimano gear hubs of the Nexus series and after modification also for Alfine SG-5700/501. Information at www.hebie.de · 350 R I18 is suitable for SRAM i-Motion and G8 with 18-22 tooth sprocket · 350 R N16 is suitable for NuVinci Harmony with 16-22 tooth sprocket · 350 R NV16 E1 is suitable for NuVinci 360 with 16-22 tooth sprocket · 0350RDI16 is especially developed for the Shimano Di2 shifting unit. The rear part is also scaleable. For 16-23 teeth at the rear. Can be combined with 38, 42, 44, 48 teeth in front. Also compatible with Bosch chain gliders. · 350RS15 is suitable for Rohloff Speedhub (also for models with push-on pinions), 15-17 teeth at the rear (not for 13 teeth), front: 38, 42, 44 teeth Please specify the matching rear part from the chart!
Thanks to its single-sided design, this Chainglider can be used as effective chainguard when using derailleur gears and hub gears with a chain tensioner. · no tools needed for installation · for single cranksets with chainring size 38 teeth or 42 teeth Please specify size.
By means of the long chain case, the complete upper part of the chain can be covered. It can be mounted at all bicycles with Top Swing front derailleurs (info see page 367) and a chain ring with 42 - 48 teeth. You should have a bottom bracket tool, because the holder of the chain case is fixed behind the right bearing shell. It forms a whole unit combined with the Xtreme protection ring for trousers (item no. 541310-1 or item no. 101936-1). - adjustable in length - suitable for single/triple cranksets - price without protection ring for trousers - available for 42 - 44 teeth or 46 - 48 teeth Please state size!
A protector to keep your trousers clean for triple cranksets with largest chainring 46-48 teeth. The suspension of the chain case is mounted behind the right bearing shell, which makes it necessary to have a bottom bracket tool. In case you already have an original trouser guard, you can keep on using it because the inner transparent plastic ring of the chain case is removable. · suitable for triple cranksets with largest chainring 46-48 teeth · length-adjustable
Chainguard fitted as standard to the following bikes: · Black Creek 2013-2016 · Multisport 2012-2016 · Black Lava 2015 38 t: singlespeed crankl, max. 38 teeth 46-48 t: triple crank, max. 48 teeth · Material: plastic, impact-resistant · Installation at the inner chain stays with an M4 or M5 screw · Distance attachment point chain stay-mounting bridge: approx. 400 mm Including: Chain case incl. mounting bridge and fastening bolts Note: The bottom bracket must be removed for installation!
Chainguard fitted as standard to the following bikes: · Black Creek 2010-2011 · Black Creek Deutsche Post Edition · Multitrack 2010 · Multisport 2010-2011 · Material: plastic, impact-resistant · For triplespeed cranks · Max. 48 teeth · Installation at the inner chain stays with an M4 or M5 screw · Distance attachment point chain stay-mounting bridge: approx. 340 mm Including: Chain case incl. mounting bridge and fastening bolts Note: The bottom bracket must be removed for installation!
A protector to keep your trousers clean for single-speed cranksets with a 38-teeth chainring. The suspension of the chain case is mounted behind the right bearing shell, which makes it necessary to have a bottom bracket tool. In case you already have an original trouser guard, you can keep on using it because the inner transparent plastic ring of the chain case is removable. · suitable for single cranksets with 38 teeth · length-adjustable
Made of robust polycarbonate, reliably protects your trousers against stubborn oil/lubricant stains caused by contact with the chain. The version for double/triple cranks has an opening at the upper edge and is therefore also suitable for standard derailleurs. The rear part of the wing is length-adjustable and can thus be adjusted to the length of the chainstay. The chain case comes with two different holders: one for fixing behind the right bearing shell and one for fixing at the crankset case. · available for single cranksets with chainring size 33-50 teeth or for double/triple cranksets with chainring size 44-50 teeth Please specify size!
The Hebie Chainbar is especially designed for our Black Water models of MY 2011-2013. To mount the chain case, you need a threaded hole in the seat stay and a threaded hole in the seat tube. This is where you can screw the Chainglider directly into the frame. Material: aluminium, plastic fender
- chain case for triple cranks with largest chain ring 48 teeth - for fixing at the right bottom bracket shell (the bottom bracket has to be removed and installed again to that end) - second fixing point at the chain stay, its drilling has to have a distance of 325 mm to the centre of the crankset casing, otherwise a fixing via clamp is also possible (clamp not included).