High-quality 2-component dirt board for the rear wheel of mountain and trekking bikes. Whether you own a 26", 27,5", 28" or 29" bike, you will find the right X-BLADE in our range. Thanks to the quick-release attachment, the dirt board can be mounted on almost every seat post. Its 2-joint technology allows an optimal adjustment to the wheel. Suitable for tyre widths up to 2,4" and tube Ø 25-40 mm. · Available for wheel size 26"/27,5" (weight approx. 228 g) or wheel size 28"/29" (weight approx. 239 g) Please specify wheel size! Manufacturer's ref.: black 26+27,5": 11449 28+29" 11450 black/grey 26+27,5" 11096 28+29" 11101
High-quality 2-component front fender that attaches to the fork of mountain and trekking bikes. The clamping cone disappears almost invisibly into the steerer tube. · Incl. adapter, suitable for steerer inner Ø 15-35 mm · Suitable for tyre widths up to 2,4" · Available for wheel size 26"/27,5" (weight approx. 101 g) or wheel size 28"/29" (weight approx. 112 g) Please specify wheel size! Manufacturer's ref. black 26+27,5" 11451 28+29" 11452 black/grey 26+27,5" 11095 28+29" 11097
Topeak X11 MTB rear mudguard that matches the front mudguard XC1 (item no. 1809356). Quick release fastener for easy and precise attachment to the seat post (Ø 25,4-34,9 mm). · With 3 struts for precise angle adjustment · Material: die-cast nylon · Weight: approx. 202 g (XC11); approx. 202 g (XC11 27,5"); approx. 220 g (XC11 29") · Width: approx. 102 mm (suitable for a tyre width of up to 2,6") · Available in 26", 27,5" or 29"
The Topeak MTB front mudguard that matches the Topeak XC11 rear mudguard (item no. 1809365). Quick release fastener to attach the mudguard to the fork (max. fork shaft inner diameter 35 mm). The fender can be dismantled into two parts for easy transport. Particularly robust yet lightweight construction. Additional flexible zones protect from dirt and increase durability. A polished underside offers good dirt resistance. · Material: die-cast nylon · Weight: approx. 190 g (26"); approx. 208 g (27,5"/29"); · Width: approx. 85 mm (suitable for a tyre width of up to 2,6") · Compatible with Manitou forks · Available in 26" or 27,5"/29" Manufacturer's ref.: 26" 15200061 / TC 9617, 27,5/29" 15200064 / TC 9639
Easily and precisely adjustable MTB front wheel mudguard. Cool look. Can be attached directly to the suspension fork (Ø 36-45 mm). Particularly rigid and still lightweight construction. Additional flexible zones protect from dirt and increase durability. The polished underside helps prevent dirt buildup. Material: die-cast nylon Weight: approx. 330 g Width: approx. 400 mm Suitable for tyres up to 26 x 2.6
With a weight of only 90 grams, the Tacx T7075 mudguard is a clever solution for all mountain bikers who want to protect themselves from splashing dirt. Thanks to a quick-release attachment, the mudguard can be easily clipped in at the saddle. Clever: As the mount is the same as for the Tacx saddle bag (item no. 2229061), you can comfortably switch between mudguard and bag and thus adapt to the weather. However, even in wet conditions you do not have to do without your accessories: The mudguard also comes with a mount for the Tacx saddle bag so that you can combine both articles. Details: • Mudguard made of shockproof plastic • Integrated mount for attachment of Tacx saddle bag, item no. 2229061 • Including quick-release mount for attachment to the seat tube rail • Length: approx. 382 mm, width: approx. 82 mm • Weight: approx. 90 g Manufacturer's ref. T7050
Fat bikes with their rough and increased profile throw more mud and dirt in the air than other bikes. The Fatboard set is specifically designed for fat bikes and keeps off dirt with a profile width of up to 141 mm. In this way you can ride your bike all through the year, without becoming too muddy yourself. · profile width: up to approx. 141 mm · weight: approx. 353 g · length front mudguard approx. 480 mm · length rear mudguard approx. 480 mm · manufacturer's ref.: 11363
Finally there's something that fits our little rowdies. These mudguards can be adjusted to fit smaller radii of 20-24" wheels. The split design of the front mudguard allows for an even more flexible attachment. The angle of the holder for the rear mudguard can be easily adjusted thanks to a slot and two joints. A perfect splash protection for kids' and youths mountain bikes. · for bikes with a wheel size of 20–24“ · front mudguard: easy attachment to the fork bridge (Note: Please note the fork manufacturer's instructions!) or fork crown (Requirement: there has to be a hole on each side) with angle plates · rear mudguard: screwed clamp fixing suitable for a tube Ø of 25–37 mm · manufacturer's ref. 10078
For perfect protection within seconds. The lightweight snap-on dirtboard SKS Shockboard Vario MTB keeps away dirt and splashing water on your MTB tours. The mudguard made from robust plastic is installed on the fork crown of your bike with a Powerstrap and is perfectly suitable for bikes with 1,5" tapered forks. The angle of the rear part of your Shockboard Vario can be precisely adapted to the geometry of your bike. Details: · Wheel size 26“-29“ with a tyre width of up to max. 2.5“ · Only for 1,5“ tapered forks · Fast installation with tension straps on fork crown · Angle of the rear part of the Shockboard Vario is individually adjustable · Length of front fender: 545 mm · Perfect protection against splashing water and dirt in combination with the SKS X-TRA DRY MTB rear mudguard (item no.: 1819335) or the SKS S-Blade rear mudguard (item no.: 1906349) · Material: plastic base body, aluminium threaded sleeves · Weight: approx. 116 g Including: SKS Shockboard Vario MTB front mudguard incl. tension straps Manufacturer's ref. 11401
D.A.D. stands for "Dual Adjust Dirtboard", which means that this mudguard can be adjusted horizontally and vertically to the fork geometry. With its angular design and its broad profile, it is perfect for large tyre sizes, while at the same time being very robust. This dirtboard can be mounted and removed easily with a special locking system. Also suitable for Manitou forks, thanks to variable alignment. · width: approx. 105 mm · incl. adapter, fits shaft inner Ø 15-35 mm · suitable for tyres up to max. 26" x 3.0
Its name (M.O.M. = MTB Oversize Mudguard) reveals that this rear wheel mudguard is designed to keep mud off bigger tyres. Its shape offers optimal protection from dirt and its robust design reduces vibrations to a minimum. A power strap fastening can be adjusted without tools to the respective seat post diameter, its tilt can be adjusted in two steps. · width: approx. 110 mm · suitable for tube Ø 25-40 mm · suitable for tyres up to max. 26" x 3.0
Consisting of: SKS Shockblade front 26"/27,5" or 28"/29" (item no. 1906419), SKS X-Blade rear 26"/27,5" or 28"/29" (item no. 1906428) and F100 bike cleaner 1 litre (item no. 1902848). You save € 6,- compared to buying the items individually!
"Dirt Jack" provides effective protection for the rear wheel. Simply clamped on the seat post, this board keeps your back clean. Multifunctional adjustment of its angle is possible with the easy-to-operate knurled screws and without tools. It is very easy to attach to your bike with a knurled screw. · width: approx. 45-75 mm · suitable for 24-29" bikes with tyre width up to 2,4" (57 mm) · suitable for seat post Ø 25-32 mm · 3 adjustable fixings to best set the angle · no tools required to fit or adjust